Archive/Mineral/Understanding Wind Energy and How It Works
Mineral Clusters · Mineral

Understanding Wind Energy and How It Works

GEO-732READER FAVORITESulfidesMineral Clusters
Understanding Wind Energy and How It Works
10 cm
click any image to enlarge
FormulaSiO₂
HardnessMohs 7
SystemTrigonal
RegionPacific Ring of Fire
SpecimenGEO-732
● 6 min read·Field report from Pacific Ring of Fire

Field report

A renewable resource that never runs out, no matter how much we use

Treehugger / Hilary Allison

Wind energy is electricity generated by the natural movement of air across the Earth's surface. Because wind is a renewable resource that does not diminish with use, harvesting it carries a far smaller environmental and climate footprint than extracting and burning fossilThe preserved remains or traces of ancient organisms, typically mineralized in sedimentaryRock formed by the accumulation and lithification of sediment. rock. fuels.

Did you know?

Plate tectonics drive the rock cycle, recycling oceanic crust back into the mantle at subduction zones.

Wind energy can be captured by something as modest as a set of eight-foot sails catching the breeze to turn a millstone and grind grain. At the other extreme, it can involve a 150-foot turbine blade spinning a generator that feeds electricity into a storage battery or a regional power grid. Engineers have even developed bladeless wind turbines.

As of 2021, more than 67,000 wind turbines were operating across 44 U.S. states, Guam, and Puerto Rico. Wind energy supplied roughly 8.4 percent of the nation's electricity in 2020. Globally, wind power meets about 6 percent of electricity demand. The industry continues to expand by roughly 10 percent each year and features prominently in the climate and sustainable growth strategies of countries such as China, India, Germany, and the United States.

Defining Wind Energy

People have harnessed wind energy in many different ways, from the straightforward, such as pumping water for livestock in remote areas, to the highly sophisticated, like the thousands of turbines lining the hills along California's Highway 580 (pictured above).

The basic anatomy of a wind energy system is fairly consistent. Some form of blade is connected to a drive shaft, which in turn drives a pump or generator that either uses or stores the captured energy. When wind is used directly for mechanical work, such as grinding grain or pumping water, the device is called a windmill. When it converts wind into electricity, it is known as a wind turbine. A turbine setup also requires supporting components, such as a battery for storage or a connection to a power grid.

No one knows exactly when humans first harnessed the wind, but it was propelling boats along Egypt's Nile River by around 5,000 B.C. By 200 B.C., people in China were using wind to drive simple water pumps, and communities across the Middle East were operating windmills with hand-woven blades to grind grain. Over the centuries, wind pumps and mills helped produce a variety of foods, and the technology spread into Europe, where the Dutch constructed large wind pumps to drain wetlands before the concept finally crossed to the Americas.

The Fundamentals of Wind

Wind arises naturally as the sun heats the atmosphere, as the Earth's surface varies in shape and texture, and as the planet rotates. Local wind speeds can then be amplified or calmed by the presence of oceans and lakes, forests, meadows, other vegetation, and shifts in elevation. Wind patterns and speeds vary widely across different landscapes and from season to season, but many of those patterns are consistent enough to plan around.

Choosing a Location

The most productive spots for wind turbines are the crests of rounded hills, open plains, open water for offshore installations, and mountain passes where wind is naturally channeled into reliable, high-speed currents. As a rule, higher elevations tend to offer stronger and more consistent winds.

Wind energy forecasting is an essential tool for choosing a turbine site. Detailed wind speed maps and datasets from organizations such as the National Oceanic and Atmospheric Administration (NOAA) and the National Renewable Energy Laboratory (NREL) provide much of this information.

A site-specific survey is essential to evaluate local wind conditions and determine the optimal orientation for turbines. Anyone planning to install a wind turbine should monitor wind speed, turbulence, direction, air temperature, and humidity at the proposed location for at least a full year. With that data in hand, it becomes far easier to design a system that will perform reliably.

Wind is not the only consideration when siting turbines. Wind farm developers must weigh proximity to transmission lines and the cities that will use the electricity, potential interference with nearby airports and air traffic, the underlying geology and any faultA fracture in rock along which movement has occurred. lines, the flight paths of birds and bats, and the impact on local communities, including noise and other effects.

Most large-scale wind projects are built to operate for at least 20 years, often longer, so all of these factors must be evaluated with a long-term view.

Different Forms of Wind Energy

Utility-Scale Wind Power

These are large-scale wind installations built to supply electricity to a utility company. They are comparable in output to a coal or natural gas power plant, which they sometimes replace or augment. The turbines each exceed 100 kilowatts in capacity and are typically grouped together to generate substantial power. Currently, systems of this kind provide about 8.4 percent of all electricity in the United States.

Offshore Wind Power

These are generally utility-scale wind projects sited in the waters off coastlines. They can deliver enormous amounts of power close to the major cities that tend to cluster along coasts, particularly in the United States. According to the U.S. Department of Energy, wind blows more consistently and forcefully offshore than over land. The agency's data suggests that the offshore wind potential in the U.S. exceeds 2,000 gigawatts, roughly twice the combined capacity of every American power plant. Worldwide, the International Energy Agency estimates that wind could supply more than 18 times humanity's current electricity use.

Small-Scale and Distributed Wind Power

This category is the inverse of the large projects described above. These are physically smaller turbines used to meet the energy needs of a specific site or local area. Some are tied into the broader electrical grid, while others operate entirely off-grid. Smaller residential installations, typically around 5 kilowatts, can cover part or most of a home's electricity needs depending on local conditions. Medium-sized units of roughly 20 kilowatts often appear at industrial or community sites, where they may form one piece of a broader renewable energy system that also incorporates solar panels, geothermal energy, or other sources.

How Wind Energy Actually Works

The purpose of a wind turbine is to use shaped blades to capture the kinetic energy carried by moving air. As wind passes over the blades, it generates lift, much as it lifts a sail to drive a boat forward. That force causes the blades to rotate, spinning the drive shaft attached to them. The shaft then drives some form of pump, whether that means directly turning a millstone over grain in a windmill or feeding rotational energy into a generator that produces electricity for immediate use or battery storage.

For a wind turbine that generates electricity, the process unfolds in several stages:

Wind Drives the Blades

A windmill or wind turbine should ideally stand in a location with steady, reliable winds. That moving air pushes against specially engineered blades designed to capture the wind's force as efficiently as possible. Blades can be configured to operate either upwind or downwind of the tower.

Kinetic Energy Becomes Mechanical Energy

Kinetic energy is the raw energy carried by moving air. Before it can be used or stored, it must be converted into a practical form of power. That transformation happens when wind strikes the blades and sets them in motion, turning kinetic energy into mechanical energy. The rotating blades spin a drive shaft.

The Generator Produces Electricity

Inside a wind turbine, the spinning drive shaft connects to a gearbox that steps up the rotational speed by a factor of 100, which in turn drives a generator. As a result, the gears rotate far faster than the blades themselves. Once the gears reach sufficient speed, they power a generator that produces electricity.

The gearbox is the heaviest and most expensive component of a typical turbine, which is why engineers are developing direct-drive generators capable of operating efficiently at lower speeds without one.

A Transformer Adjusts the Current

The generator produces 60-cycle alternating current, or AC, electricity. Depending on local requirements, a transformer may be needed to convert that output into another form of electricity.

Electricity Is Consumed or Stored

Electricity from a wind turbine may be consumed on site, which is common in smaller or medium-sized installations, fed into transmission lines for immediate use elsewhere, or stored in a battery for later.

Better battery storage is central to the future of wind energy. Greater storage capacity means that on days when the wind barely blows, electricity saved from windier periods can fill the gap. In this way, the natural variability of wind becomes far less of an obstacle to reliable power.

What Exactly Is a Wind Farm?

A wind farm is a grouping of wind turbines that together function as a single power plant, generating electricity from the wind. There is no official minimum size, so a wind farm might consist of just a handful of turbines or several hundred, whether located on land or out at sea.

The Advantages and Drawbacks of Wind

"How Many Turbines Are Contained in the U.S. Wind Turbine Database?"United States Geological Survey.

“Electricity Explained: Electricity in the United States.”U.S. Energy Information Agency,2021.

“International Energy Outlook 2019 With Projections to 2050.”U.S. Energy Information Agency,2019, pp. 90-91.

“Global Wind Report 2019.”Global Wind Energy Council.

“Wind Explained History of Wind Power.”U.S. Energy Information Agency.

“Offshore Wind Research and Development.”U.S. Department of Energy Office of Energy Efficiency & Renewable Energy.

"Offshore Wind Outlook 2019."International Energy Agency.

References & Sources

  • Primary source: https://www.treehugger.com/what-is-wind-energy-definition-and-how-it-works-8734016
  • Regional reference: Pacific Ring of Fire geological survey.
  • Cross-reference: Mineral Clusters archive, specimen GEO-732.

Continue the Fieldwork

  • Visit a local geological museum and examine their mineral collection.
  • Take a field notebook on your next hike and sketch the rock formations you see.
  • Support organizations that protect fossil heritage sites from looting.

Specimen bookmarked for your next dig.